• After takeoff the autothrottle will remain in Throttle Hold (THR HLD) until 800 feet RA.

    ✅ True

  • If an altitude restriction is entered before TOD, the aircraft will commence the descent early to follow a new idle descent path to achieve the descent restriction. If ALT INTV is then selected after the descent restriction, which of the paths will the aircraft follow?

    • ❌ Path A. Descends to achieve restriction then maintains level flight until intercepts the original idle descent path.
    • ❌ Path C. Descends to achieve restriction, then continues steady descent to End of Descent.
    • ❌ Path D. Descends to achieve restriction, then continues on that new idle descent path until new commands are entered.
    • ✅ Path B. Descends to achieve restriction then descends at 1000 fpm until intercepting original idle descent path.
  • An altitude restriction is entered at the top of descent, the aircraft will not now follow the Idle Descent path but will descend to meet the altitude restriction. After achieving the altitude restriction which of the indicated flight paths will the aircraft follow for the rest of the descent?

    • ✅ Descends to achieve restriction then maintains level flight until intercepts the original idle descent path. (A)
    • ❌ Descends to achieve restriction, then continues steady descent to End of Descent. (C)
    • ❌ None of the options
    • ❌ Descends to achieve restriction then descends at 1000 fpm until intercepting original idle descent path. (B)
  • At what altitude will the FLARE manoeuvre start during AUTOLAND?

    • ❌ 50 feet AGL.
    • ✅ 50 RA.
    • ❌ 350 feet RA.
    • ❌ 500 feet AGL.
  • During THR HLD (Throttle Hold), if you manually move the throttle levers, the A/T will try to return them to their original position.

    ❌ False

  • In flight, with Autopilot engaged in CMD B, which FCC controls the logic for the flight directors on the Captain's PFD.

    • ❌ FMS A
    • ❌ FMS B
    • ❌ FCC A
    • ✅ FCC B
  • The VOR/LOC mode must be armed before the second Autopilot can be selected during a dual channel autopilot approach.

    ❌ False

  • What does a flashing "A" displayed to the left of the selected MCP speed indicate?

    • ✅ Underspeed limiting, FMC speed or MCP selected speed cannot be reached.
    • ❌ limiting for maximum speed for current flap setting.
    • ❌ Overspeed limiting at Mmo limit
    • ❌ Overspeed limiting at Vmo Limit
    • ❌ Overspeed limiting, current speed selection greater than current flap setting limit.
    • ❌ Overspeed limiting, Minimum speed for current flap setting cannot be achieved.
    • ❌ Underspeed limiting, Vmo or Mmo limit.
  • What normally provides the N1 limits and target N1 values to the Autothrottle?

    • ❌ The Electronic Engine Controls (EECs).
    • ✅ The Flight Management Computer.
    • ❌ The Autothrottle Computer.
    • ❌ The Flight Control Computers.
  • What components make up the Automatic Flight System (AFS)?

    • ❌ Flight directors, MCP mode selector system, autothrottles.
    • ❌ Autopilot, MCP mode selector system, autothrottles.
    • ✅ Autothrottles and autopilot flight director system.
    • ❌ AFDS, MCP mode selector system, autothrottles.
  • What are the indications for A/T disconnected.

    • ❌ A/T P/RST disengage light illuminates steady.
    • ❌ Tone sounds and A/T P/RST disengage light illuminates steady
    • ✅ A/T P/RST disengage light flashes.
    • ❌ Tone sounds and A/T P/RST disengage light flashes
  • For approach, by what altitude must the second Autopilot be selected for dual Autopilot operation?

    • ❌ 1500 feet RA
    • ❌ 500 feet RA
    • ❌ 350 feet RA
    • ✅ 800 feet RA
  • Below which RA should FLARE mode be armed during AUTOLAND?

    • ❌ 350 feet RA.
    • ✅ 1500 RA
    • ❌ 50 feet RA.
    • ❌ 350 feet AGL.
  • With VNAV engaged, pushing the SPD INTV switch has what effect?

    • ❌ IAS/MACH window blanks and next FMC speed restriction becomes active, magenta target speed displayed above speed tape on PFD.
    • ✅ IAS/MACH window opens up showing current FMC target speed, and IAS/MACH selector can be used to set new desired speed.
    • ❌ Current or next speed restriction deleted from FMC, IAS/MACH window opens up showing previous FMC target speed, and IAS/MACH selector can be used to set new desired speed.
    • ❌ No effect, VNAV remains engaged with the FMC controlling target speed.
  • Why do we check that FLARE mode is armed at 500 feet RA?

    • ❌ To allow start of the flare manoeuvre at 350 feet RA.
    • ❌ To allow APP mode to be selected at this point if FLARE not armed.
    • ✅ To be aware that A/P will disengage at 350 feet RA if not armed.
    • ❌ To allow the second A/P to be engaged at this point.
  • In flight below 2000 feet RA, on an ILS Autopilot approach with flare armed, what happens if you push a TO/GA switch once?

    • ✅ Autothrottle advances thrust levers to reduced Go-Around N1.
    • ❌ Autothrottle will disengage, and ARM is displayed in FMA.
    • ❌ Autothrottle advances thrust levers to full Go-Around N1.
    • ❌ Autopilot will disengage, and CWS P will annunciate.
  • Which Statements are correct?

    • ✅ The A/T automatically disengages approximately 2 seconds after touchdown.
    • ✅ The A/P must be manually disengaged after touchdown.
    • ✅ Landing roll-out is executed manually after disengaging the A/P.
    • ❌ The A/T must be manually disengaged after touchdown.
    • ❌ The A/P automatically disengages approximately 2 seconds after touchdown.
    • ❌ Landing roll-out is executed automatically by the A/P.
  • The A/T is controlled by FCC A only.

    ✅ True

  • What does an illuminated green light mean in the MCP buttons?

    • ❌ That mode is currently engaged and active.
    • ❌ The switch is available to be selected.
    • ❌ That mode is currently de-selected and inactive.
    • ✅ That switch can be de-selected.
  • Other than by selecting N1 mode by pressing the N1 switch on the MCP, when else will N1 mode automatically engage.

    • ❌ LVL CHG and VNAV engaged within first 2.5 minutes after takeoff.
    • ❌ Never, N1 mode is only ever manually selected and engaged.
    • ❌ LVL CHG engaged in climb more than 2.5 minutes after takeoff.
    • ✅ VNAV engaged in climb and LVL CHG engaged in climb more than 2.5 minutes after takeoff.
  • What will cause the A/T to disengage?

    • ❌ Push Either A/T Disengage switch and Move A/T ARM switch to OFF
    • ❌ Push Either A/T Disengage switch and An A/T system fault is detected
    • ❌ Immediately the left main landing gear is compressed, Push Either A/T Disengage switch and Move A/T ARM switch to OFF.
    • ✅ Move A/T ARM switch to OFF, Push Either A/T Disengage switch and An A/T system fault is detected
  • The Autothrottle (A/T) system, provides automatic thrust control from the start of takeoff, through all stages of flight to up to and including landing.

    ✅ True

  • If you engage Level Change by pressing the LVL CHG switch on the MCP and the green light illuminates, what other indications will occur as this mode engages?

    • ❌ Speed window blanks, MCP SPD annunciated for pitch mode, N1 annunciated for thrust mode.
    • ❌ Speed window blanks, MCP SPD annunciated for pitch mode, N1 or RETARD/ARM annunciated for thrust mode.
    • ❌ Speed window opens to show target speed, MCP SPD annunciated for thrust mode, N1 annunciated for pitch mode.
    • ✅ Speed window opens to show target speed, MCP SPD annunciated for pitch mode, N1 or RETARD/ARM annunciated for thrust mode.