• The landing gear can be extended by:

    • ✅ The GREEN hydraulic system or gravity extension
    • ❌ The GREEN and YELLOW hydraulic system
    • ❌ The BLUE and GREEN hydraulic system
    • ❌ The GREEN and YELLOW hydraulic system and gravity extension
  • The safety valve of the landing gear cuts off the hydraulic supply. At what airspeed?

    • ❌ < 220 kts
    • ✅ > 260kts
    • ❌ > 280 kt
    • ❌ ) > 230 kt
  • Green hydraulic system available, you find the A/SKID and NWS switch in OFF position:

    • ❌ Braking is normal, nosewheel steering lost.
    • ❌ Braking provided by yellow system, nosewheel steering normal.
    • ✅ Braking provided by yellow system, nose wheel steering lost.
    • ❌ ---
  • Automatic braking is initiated:

    • ✅ At the command for ground spoilers extension
    • ❌ At reverse selectio
    • ❌ At strut compression
    • ❌ At anti-skid activ
  • The safety valve of the landing gear cuts off the hydraulic supply. At what speed?

    • ❌ < 220 kts
    • ✅ >260kts
    • ❌ >280 kts
    • ❌ 230 kts
  • The landing gear indicator panel unlock light illuminates red if:

    • ✅ Gear is not locked in selected position.
    • ❌ Gear is extended by gravity and doors are not closed.
    • ❌ Gear is extended normally and doors are not closed.
    • ❌ ---
  • Landing gear can be extended by:

    • ❌ Green system or yellow in stand by.
    • ✅ Green system or mechanical gravity extension.
    • ❌ Green system for unlocking, gravity extension and green system for downlocking.
    • ❌ Blue system or mechanical gravity extension.
  • When both handwheels are operated simultaneously, the signals:

    • ❌ From the first pilot acting on his handwheel have priority
    • ❌ Coming from the captain have priority.
    • ✅ Are added algebraically.
    • ❌ ---
  • Nose wheel steering by rudder pedals is limited to:

    • ❌ 2° to 6° under all circumstances.
    • ✅ 0° to 6° depending on A/C speed.
    • ❌ ---
    • ❌ ---
  • The antiskid system gets its reference speed from:

    • ✅ ADIRU 1 or 2 or 3.
    • ❌ ADIRU 2 or 3.
    • ❌ ADIRU 1 or 3.
    • ❌ ---
  • During an approach with L/G not down locked, flaps extended and both engines not at T.O power you get master warning and ECAM 'gear not down!' at an radio height of

    • ❌ lower than 1,000 ft and higher than 850 ft.
    • ❌ lower than 850 ft and higher than 750 ft
    • ✅ lower than 750 ft
    • ❌ ---
  • A safety valve automatically cuts off hydraulic supply to the landing gear system when flying faster than :

    • ❌ 280 kts
    • ❌ 250 kts.
    • ✅ 260 kts.
    • ❌ ---
  • After T/O the left main gear shock absorber is stuck in compressed position.

    • ❌ The gear can be retracted under all circumstances (safety).
    • ❌ The gear can be retracted provided the nose gear is centred.
    • ✅ The gear can not be retracted.
    • ❌ ---
  • You have set the L/G selector to the DOWN position. While the landing gear is moving to the selected position, L/G CTL appears amber on the ECAM WHEEL PAGE, along with an ECAM caution. What causes this indication?

    • ❌ L/G is up and unlocked, the L/G doors are open and the L/G CTL shows lever positions disagree.
    • ❌ The computers which provide gear position information have failed.
    • ✅ The L/G is not locked in the selected position. L/G CTL lever and L/G position do not agree
    • ❌ L/G CTL indicates that the lowering system has failed. The gear must be extended by gravity.
  • You perform a landing with AUTO/BRK set to MED. After touch down what triggers the AUTO/BRK?

    • ❌ The AUTO/BRK system works as soon as the main landing gear is compressed
    • ✅ AUTO/BRK commences when the ground spoilers extend and sends progressive pressure to the brakes after a few seconds
    • ❌ The AUTO/BRK system is triggered when the thrust reversers are unlocked
    • ❌ The AUTO/BRK system works as soon as the nose gear is compressed
  • With the brake fan push button in ON position the brake fan runs:

    • ❌ When the aircraft is on ground
    • ✅ When the left main landing gear is downlocked
    • ❌ As long as the brake HOT light on the brake fan pushbutton is illuminated
    • ❌ When the right main landing gear is downlocked and the aircraft is on ground
  • One LGCIU controls one complete gear cycle, then switches over automatically to the other LGCIU.

    • ✅ It switches automatically at landing gear retraction
    • ❌ It switches automatically at landing gear extension
    • ❌ It switches automatically, when below 72 kt after touch down
    • ❌ It switches automatically after the second engine has been started
  • On wheel page of ECAM, a green arc appears on one wheel indicator meaning the brake temperature is above:

    • ❌ 300°C.
    • ✅ 100°C.
    • ❌ 50°C.
    • ❌ ---
  • At _______________ the connection between nosewheel steering and the rudder pedals is removed

    • ✅ 130 knots (aircraft ground speed)
    • ❌ 110 knots (aircraft ground speed)
    • ❌ touchdow
    • ❌ ---
  • On the ECAM wheel page, AUTO BRK is flashing green:

    • ✅ When the auto brake is disengaged (flashing green for 10 seconds)
    • ❌ When the auto brake system is working properly and when the actual deceleration is 80% or more of the selected rate
    • ❌ When the BSCU detects a failure in the Antiskid system
    • ❌ When the actual deceleration is less than 80% of the selected rate
  • How many turns are necessary to extend the landing gear by gravity using the handcrank:

    • ❌ Ten turns clockwise.
    • ❌ Five turns clockwise
    • ✅ Three turns clockwise
    • ❌ ---
  • How many Landing Gear Control and Interface Units (LGCIUs) control the extension and retraction of the gear and the operation of the doors?

    • ❌ LGCIU 1 controls the operation of the gears, LGCIU 2 controls the operation of the doors
    • ✅ One LGCIU controls one complete gear cycle, then switches over automatically to the other LGCIU at the completion of the retraction cycle.
    • ❌ Three Units: One LGCIU controls the operation of each landing gear strut. LGCIU 3 additionally controls the operation of all doors.
    • ❌ ---
  • The principle of the anti-skid is:

    • ❌ Comparing the speed difference between the four main wheels
    • ✅ Comparing wheel speed with A/C reference speed
    • ❌ Comparing wheel speed with left and right landing gear
    • ❌ Comparing speed difference between main wheels and nose wheels
  • The alternate brake system uses:

    • ❌ The yellow hydraulic system.
    • ❌ The hydraulic accumulator.
    • ✅ The yellow hydraulic system and the hydraulic accumulator
    • ❌ ---
  • The principle of the anti-skid is

    • ❌ Comparing the speed difference between the four wheels.
    • ✅ Comparing wheel speed with A/C reference speed.
    • ❌ Comparing wheel speed with left and right landing gear.
    • ❌ ---
  • The brakes can be activated by independent systems, pressurized by the:

    • ❌ BLUE or GREEN hydraulic system
    • ✅ YELLOW or GREEN hydraulic system
    • ❌ BLUE or YELLOW hydraulic system
    • ❌ YELLOW or GREEN or ALTERNATE (BLUE) hydraulic system
  • 4 The max speed with landing gear extended (VLe) is:

    • ❌ 300 kts/M.70
    • ✅ 280 kts/M.67
    • ❌ 260 kts/M.60
    • ❌ 250 kts/M0.60
  • On wheel page of ECAM, AUTO BRK is flashing green:

    • ✅ Auto brake is disengaged (flashing green for 10 seconds).
    • ❌ Auto brake failure
    • ❌ Anti-skid failure
    • ❌ ---
  • Landing gear position is indicated by:

    • ❌ One panel on centre instrument panel and one panel on overhead panel.
    • ❌ ECAM only
    • ✅ One panel on centre instrument panel, ECAM
    • ❌ One panel on centre instrument panel, ECAM, visual means on the wing
  • After lift off, is the brakes hot caution on ECAM still displayed?

    • ✅ Yes, with gear down or up.
    • ❌ Yes, with gear down only.
    • ❌ No, it is not displayed.
    • ❌ ---
  • You are ready to taxi. You apply the toe brakes on the rudder pedals and release the PARK BRK. The BRAKES pressure falls to zero. What should you do?

    • ❌ This should not happen and you must assume that the BRAKES pressure indicator has failed.
    • ✅ Nothing, as this is normal. The BRAKES pressure indicator only indicates alternate (yellow) brake pressure.
    • ❌ You must re-apply the PARK BRK and call for maintenance personnel as the main system pressure has failed.
    • ❌ The indication is normal because once the AUTO BRK is set to MAX the BRAKES indicator is by-passed.
  • Auto braking is initiated by

    • ❌ Reverse thrust selection.
    • ✅ Ground spoilers extension.
    • ❌ Reverse thrust selection after ground spoiler extension.
    • ❌ ---
  • 9 What is required to arm the auto brakes?

    • ✅ Green hydraulic pressure available, anti-skid electrical powered, no failure in the braking system, at least one ADIRS functioning
    • ❌ Green and Yellow hydraulic pressure available, anti-skid electrical powered, no failure in the braking system, all ADIRS functioning
    • ❌ Green hydraulic pressure available, anti-skid electrical powered, no failure in the braking system, all ADIRS functioning
    • ❌ Green hydraulic pressure available, no failure in the braking system, at least one ADIRS functioning
  • If tire damage is suspected after landing or after a rejected takeoff, an inspection of the tires is required before taxi. If the tire is deflated but not damaged, the aircraft can be taxied at low speed with the following limitations :

    • ❌ f one tire is deflated on one or more gears (i.e. a maximum of three tires), the speed should be limited to 7 knots when turning.
    • ❌ If two tires are deflated on the same main gear (the other main gear tires not being deflated), speed should be limited to 3 knots and the nose wheel steering angle limited to 30 degrees.
    • ✅ Both answers are correct
    • ❌ ---
  • If tire damage is suspected after landing or after a rejected takeoff, the following limitation must be adhered to:

    • ❌ If one tire is deflated on one or more gears (i.e. a maximum of three tires), the speed should be limited to 7 knots when turning
    • ❌ If two tires are deflated on the same main gear (the other main gear tires not being deflated), speed should be limited to 3 knots and the nose wheel steering angle limited to 30 degrees
    • ❌ An inspection of the tires is required before taxi, and if the tires are deflated but not damaged, the aircraft can be taxied at low speed
    • ✅ All answers are correct
  • Which answer about the landing gear indications is correct?

    • ❌ LGCIU 1 is connected to the Landing gear indicator panel only, if a fault is detected within LGCIU 1, the connection will be transferred to LGCIU 2
    • ❌ LGCIU 2 is connected to the Landing gear indicator panel only
    • ✅ LGCIU 1 is connected to the Landing gear indicator panel (as long it is electrically supplied) and supplies information to the ECAM WHEEL Page
    • ❌ LGCIU 1 is connected to the Landing gear indicator panel (as long as no fault is detected) and supplies information to the ECAM WHEEL Page
  • The red arrow, near the landing gear lever, comes on when the landing gear is:

    • ✅ Not locked down when the aircraft is in Landing configuration, and a red warning appears on ECAM
    • ❌ Not locked down when the aircraft is in Approach (min. Flaps 2) configuration, below 1.000ft and a red warning appears on ECAM
    • ❌ Is in abnormal position
    • ❌ Not locked down when the aircraft is in Landing configuration or LGCIU 1 is faulty or landing gear is in an abnormal position
  • If after a gravity gear extension the gear is downlocked but the gear lever is not set in DOWN position then...

    • ❌ it has no consequences neither for the indications nor for the operation of the gear
    • ❌ the ECAM alert L/G SYS DISAGREE will be triggered
    • ✅ the red UNLK lights on the gear indication panel remain on
    • ❌ ---
  • The landing gear positions are indicated by 2 triangles for each gear. Each triangle is controlled by one LGCIU:

    • a green triangle indicates that one LGCIU detects a landing gear downlocked.

    • a red triangle indicates that one LGCIU detects a landing gear which is not locked in the selected position.

    ✅ True

  • What is indicated by a DECEL light being illuminated on the auto brake panel?

    • ❌ When the actual deceleration corresponds to the selected rate
    • ❌ When the actual deceleration is 50% or more of the selected rate
    • ❌ When the actual deceleration is 75% or more of the selected rate
    • ✅ When the actual deceleration is 80% or more of the selected rate